PRODUCT INFORMATION  >>  TRAILER TOP TENTS  >>  PICTURES

PICTURES  OF  OUTSIDE:

Standard model on LHS (ie annex on LHS & tent in middle) with (optional) additional room on RHS of picture.Additional room (optional extra) on LHS attached to standard model (ie tent in middle & annex on RHS of picture).

 

The canvas front wall on the annex can be swapped with a full mesh front if desired.
The full mesh front is included with the standard trailer top tent package.

The tent base can still be tilted when just the tent is erected, provided there are
no spreader bars attached, & the
stable table is not in place.

 

Standard model with extra (double) annex.  Tent is on RHS of picture, & 2 annexes are in the middle & on LHS.Standard model with extra (double) annex.  Tent is at back of picture & annexes are at the middle & front.

 

PICTURES  OF  INSIDE:

LHS of annex (& bed area
through door on RHS of picture).

Looking into centre of annex (with tent through door, & additional room in rear).

RHS of annex (& tent area, with room divider, through door on LHS of picture).

 

Living area of tent, without room divider, (& additional room through door on LHS of picture).

Living area of tent, with optional room divider (with door tied opened).

Optional additional room
(attached to tent by zip & velcro).

 

PICTURES  OF  VARIOUS  FEATURES:

Flexible bed partition area:

Partially open.

Fully closed.Fully open (with flap rolled
down & tied in place).		Fully open (with
flap hanging down).

 

Access door from tent to side of trailer (there are two access flaps - one at the front of the trailer, & one at the back):

Fully closed.

Door rolled open (& tied down)
with mesh door closed.

Fully open, with direct access to trailer.

 

Tail gate cover:

Fully closed.

Top piece removed, (it can be rolled
up & tied at the top if desired).

Top piece removed & tail gate open.

 

Top piece in place & tail gate open.

Fully removed & tail gate closed.

Fully removed & tail gate open.

 

Internal window flaps for tent & additional room:

Flap can be left fully closed.Flap can be left half way up, allowing sun through the top
half of the window (PVC),
& not the rain.		Flap can be fully opened & left
to hang.  The bottom half of
the window is made of mesh, allowing air ventilation.		Flap can be rolled fully opened & tied in place at the base of the window.

 

All external tent window flaps:

Fully closed.Rolled half way open (& tied).Fully rolled open (& tied).Awning flap above each window.

 

External awning window flaps & weather shields:

All external widow flaps have eyelets so they can be set up as an awning or rolled open (& tied).External flap set up as an awning.External flap with weather shield velcroed in (available on 2 side annex windows & bedside window).Bedside window (far LHS) has been set up as an awning with weather shield.  Awning poles can be set diagonally or vertically.

 

Travel cover:

The tent is designed so that when it is packed away, the
clean canvas only touches other clean canvas, & the dirty
underside of the floor only touches other areas of dirty
floor underside.  The 4 packing straps are also excellent
for securing the packed tent & additional gear.		 The tough water-proof PVC travel cover is a fantastic 43 cm
height, allowing for HEAPS of storage of the tent,
everybody's bedding, annex, etc. etc. & is also very
forgiving for those not-so-neat & compact pack-aways!!!

 

Miscellaneous features:

 Flat foot rung ladder with own canvas cover bag. Each door has a mesh & canvas flap,
which can be tied back separately.

 

4 hanging storage pockets in tent - 2 below RHS window & 1 at each end of the bed.

 Waterproof PVC floor sewn 100mm up base of tent walls, & waterproof annex floor velcroed 100mm up annex walls, to prevent water on ground from coming in.

 

D Rings around tent base are reinforced, with additional rings around corners.

 

Strong thick plastic zips used throughout.

Zip between tent & annex
allowing passage of electrical cords.

 

Galvanised pivot suporting frame system
for quick & easy setup & pack up.		Strong & sturdy framework structure allows self
supporting without having to always use ropes.

 

All curved poles are reinforced in
the corners for extra strength.		Spreader bars add to the fantastic horizontal roof pole support system, & help water to quickly & easily run off.Seam tape & double canvas where horizontal roof bars
touch maximise the unit's
waterproof-ability.		Double PVC pole pockets for all poles which rest on tent floor.

 

Two different types of very strong pegs are included - each 30cm long.Strong canvas pole bag (plus a peg bag), with carry handles & zip right along the top for easy access.Waterproofing caps are provided to put on top of the vertical poles.There are 2 different lengths of rope, all of which are made of strong polyester, 5.5mm in diameter.  Most have a spring tensioner attached.

 

The mattress cover is a cotton blend.
Notice the additional waterproof PVC
sewn into the tent, around 3 sides of
the mattress - this stops the mattress
having direct contact with canvas.

 

Main change in current model:

Please be aware that the current model of tent has slightly more features than what has been pictured above.

The main difference is that it will have vertical doors, as pictured directly above,
rather than the D-shaped ones, which have been pictured elsewhere above.

 

 

About Us  |  Product Information  |  Videos / Photos  |  Other Information  |  Contact Us