PRODUCT INFORMATION  >>  CAMPING  TRAILER  KITCHEN  &  STORAGE  OPTIONS

 

We offer various kitchen & storage options for both our camping trailer and ute back tent setups.  Because our camping trailers offer so much more storage room than most, the camping trailer cavity can be divided into 2 futher sections:

  1. "top storage" area; &
  2. "bottom storage" area.

Within each of these sections there are different storage and/or kitchen-storage options available.  The section directly below shows a 'Full Trailer Box Top Storage' fitout.  Also available is a 'Half Trailer Box Top Storage' fitout, as well as 'Floating Floors' only.

Likewise, there are heaps of further options with regards to the bottom storage area of our camping trailers and ute back tent setups.

 
All prices for the various kitchen and storage options can be found on the 'Camping Trailer Estimation Form' and / or the 'Ute Back Tent Setup Estimation Form' at the bottom of the Product Information webpage.  The approximate dimensions of the camping trailer kitchens are 470W x 435H x 1500L (mm).
 

Standard Camping Trailer Kitchen with Swing Out Bench
(Can initially purchase a standard kitchen &
add a swing out bench at a later date if desired)

 

Pull out bench (& drop down shelf below) add extra bench space,
but pull out bench can also be removed & used as a handy tray.

 
Full Top Storage Fitout
  • Designed to fill the entire top cavity of the trailer box.
  • All but 1 of the boxes / drawers are bootlined.
  • At least one of these boxes / drawers, (two if you have a front door in the trailer side - as is the case in the middle picture below), pulls out from the trailer allowing easy access to your stored contents.
  • Perfect for segregating & storing poles, pegs, ropes, food, etc. etc.
  • Internal dividers within the boxes / drawers help to separate / compartmentalise the storage.

 

Excess storage space before
installing TBTS.		Front side door allows for extra drawer.When there is no door in the side of the trailer, the "Pantry" box is full length.

A full TBTS has (2 to 3) fully lined boxes & 1 unlined peg box
A = Pole box (segregating various poles, ropes, etc.).
B = "Pantry" drawer (segregating food).  Slides out end of trailer.
C = Peg box (segregating various pegs, hammer, etc.).
D = Miscellaneous front drawer.  Slides out front side of trailer (if installed with a door).

 

Excess storage space before
installing TBTS.		The TBTS now fills the space.The "Pantry" drawer (box B) acts as a fantastic food storage drawer,
as can be seen above.

 

The Misc. drawer (box D) fits neatly above the FSD.The Peg box (box C) fits neatly within the Misc. drawer (box D) or "Pantry" (box B).Like the "Pantry" drawer (box B), the Misc. drawer (box D) is also self supporting when pulled out from the trailer.
 

Half Top Storage Fitout with Kitchen Package Deal (Below)

 

About Us  |  Product Information  |  Videos / Photos  |  Other Information  |  Contact Us