Box | Camping Trailers | |
Trailer | On-Road | 4WD | Description |
Yes | Yes | Yes | 7 x 4 foot trailer |
Yes | Yes | Yes | 50mm ball coupling |
Yes | Yes | Yes | 2 x heavy duty 1 tonne 5 leaf springs |
Yes | Yes | Yes | Heavy duty swing up jockey wheel, welded on to prevent theft, & folded up for ease of use |
Yes | Yes | Yes | New 5 stud Ford or Holden hubs and stubs (most common choice, particularly for on-road) |
Yes | Yes | Yes | 50 x 50 x (5.0mm thick) RHS Axle (this is standard size for stubs & is less likely to bend than a solid axle) |
Yes | Yes | Yes | LED lighting (including number plate LED light) (mounted at the side not to interfere with the tail gate) |
Yes | Yes | Yes | Includes all wiring & 7 pin flat or 6 pin round trailer plug |
Yes | Yes | Yes | Metal conduit along full length of trailer underside to protect wiring as much as possible |
Yes | Yes | Yes | 1.6mm thick folded side panels |
Yes | Yes | Yes | Fully undercoated on both sides before painting |
Yes | Yes | Yes | Painted in choice of colour (standard colour is hammertone - 'Gun Metal Grey', customised colours approximately $100 extra) |
No | Yes | Yes | Full angled brush guard on each side (better known as a trailer side step) |
Yes | No | No | Provision for addition of framework |
Yes | No | No | 3 tie down rails - along the entire back and sides |
| | | Tailgate: |
Yes | No | No | Drop down rear tailgate with slip on-off hinges (one slightly longer than the other to easily attach / remove) |
No | Yes | Yes | Side opening rear tailgate which can be easily removed (this is REALLY handy, particularly when the annex is set up) |
No | Yes | Yes | Upright spring-lock to lock the tailgate open |
No | Yes | Yes | Tailgate closed with 2 lockable centre-over latches (providing better seal, more storage space inside, & double protection when travelling) |
N/A | Yes | Yes | Any openings to trailer are fully sealed with high quality seals (eg camping trailer tailgate or door in side of camping trailer) |
| | | Height of sides: |
No | Yes | Yes | 620mm high sides (unless having 16+ inch wheels / tyres) |
Yes | No | No | 395mm high sides |
| | | RHS Chassis Frame: |
Yes | No | Yes | 65 x 35 x (2.5mm thick) RHS trailer frame |
No | Yes | No | 35 x 35 x (2.0mm thick) RHS trailer frame |
| | | Drawbar: |
No | No | Yes | 75 x 50 x (2.5mm thick) RHS drawbar up to 1800mm long |
Yes | Yes | No | 75 x 50 x (2.5mm thick) RHS drawbar up to 1500mm long |
| | | Floor & side joins: |
Yes | No | Yes | Fully seam welded floor and side joins |
No | Yes | No | Stitch welded floor and side joins |
| | | Floor Thickness: |
Yes | No | Yes | 2.0mm thick blackform floor sheet |
No | Yes | No | 1.6mm thick blackform floor sheet |
| | | |
$2,315 | $3,000 | $3,800 | Total price of standard trailers |
